In order to install micro-capacitors in capacitor bank boards, like other capacitor banks, a micro-capacitor bank board can be considered for the system by using a power factor correction controller (capacitor regulator). In this case, the compensation system is more centralized and it is easier to handle and troubleshoot. The controller will start the instantaneous power factor value and enter the capacitor into the circuit according to the needs of the system. The micro-capacitors are entered into the circuit by the contactor and a breaker or fuse is considered for protection in each step
All the requirements related to the selection of fuse and contactor switches for micro-capacitor bank panels are the same as conventional capacitor bank panels, and the use of a factor of 1.5 times the rated current is also true
The zero of the micro-capacitors must be connected to the network earth or, if there is no suitable earth, to the network zero